CMC, 48 LED Solar Powered Light PIR Motion Sensor Street Outdoor IP65 Waterproof Pathway Garden Fence Lamp with 3 Mode

  • $23.28
    Unit price per 
  • Save $14.28
Shipping calculated at checkout.

Only 2899 left!

800 LM 48 LED Solar Power Street Light PIR Motion Sensor Lamps wall Lamp remote control rotate bracket ip65 for outdoor street garden yard pathway door etc

update point:

1. update the pole to safety lock rotate the bracket, can rotate 180 degrees in 2 positions with gear lock.

2. update to 800 lumens, wide the lighting area, and update 36 LEDs to 48 LEDs, light up more area and more bright

3. add remote control function, more convenient, can set up mode and brightness by remote controller, can switch on/off by the remote controller


Lamp specifications:
Lamp power usage: 5.5 V 2.5 W
Battery: 3.7 V 2000 mAH Lithium
Expected battery charge time: 8 hours
LED quantity and type: 48 x 2835 SMD
Rated power: 3.8 W
Lumens: 800
Colors:6000 k to 6500 K
Rotate bracket: rotate 180 degrees in 2 positions, Gear lock
Remote control: can set up mode and switch on/off the lamp and adjust the brightness
Solar panel power: 5.5 V 2.5 W
Solar panel conversion rate: 17 % efficiency
Solar panel life expectancy: 15 years
Waterproofing: IP65, can endure extreme weather but can not immerse to water

Details of lamp operations:
Direct sunlight hits the solar panel and charges the onboard battery during the day.
The lamp senses low light and automatically come to work mode if in dim mode, keep dim light at night and fully light after people motion if in motion mode, will light up when people come at night if in steady light mode, will keep light at night and come to motion mode after 3 hours automatically.
The LEDs activate when the lamp senses motion within range.
After motion activation, the LEDs will remain illuminated for 15 seconds before shutting off. Continuous or repeated movement within range will extend illumination time.
The lamp senses daylight and automatically come to charging mode
If manual power control is required, press the function switch for 3 seconds to either activate or deactivate lamp power.
for remote control, press the on button for 3 seconds to switch on the light, and press the function button to set up mode and adjust brightness.
rotate bracket has the self-lock function, when adjusting the bracket, pls release the nuts, otherwise, they can not adjust the degrees.


We Also Recommend